KS 92-1 Single Loop Process Controller

KS 92-1

The KS 92-1 process controller is suitable for universal, precise, and cost-effective control. The instrument provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control.

The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement, as an external set-point inputter for position feedback measurement of motorised stepping controllers.

The optional 3rd input is a universal input that can be used for several functions, e.g. temperature dependent setpoint correction or differential control. The standard KS 92-1 is suitable for oxygen control using heated and unheated O2 sensors.

The KS 92-1 is particularly suited to the following applications:

Furnaces and ovens
Burners and boilers
Plastics processing
Driers

The KS 92-1 is particularly suited to the following applications:

* Furnaces and ovens

* Burners and boilers

* Plastics processing

* Driers

The KS 92-1 is particularly suited to the following applications:

Furnaces and ovens
Burners and boilers
Plastics processing
Driers

BluePort®
Front interface and BlueControl software
Maintenance manager and error list
Two universal inputs
Day & Night display shows plain text and bargraphs
Manual gain scheduling
Self-Tuning to the setpoint without oscillation
Valve controller with position feedback and DAC monitoring
3-point controller for water, fan and oil cooling
Type tested to EN 14597 (replaces DIN 3440) and cULus
High-impedance mV input for O2 sensors
Two switchable parameter sets

Product Category:	Single Loop controller
Dimensions and size:	96m x 96mm x 118mm (HxWxD), 1/4 DIN
Connectors:	Pin or screw terminals
Primary Input Type:	Universal (TC, RTD, DC linear mA/mV)
Other Inputs:	External setpoint, Ratio input, Potentiometer input, Heating current monitoring
Output Type:	Relay, Logic, Linear mA/VDC, Optocoupler
Max. Number of Outputs:	6
Scan Time:	100 ms
Number of Programmer Segments:	16 Program x 16 Segments
Control Type:	2-point (on/off), continuous PID control, or 3-point stepping
Power Supply:	90-260 VAC, 20,4-26,4 VAC: Frequency 48-62 Hz, 18-31 V DC
Communications:	RS422 & RS485 Modbus, Profibus-DP
Panel Sealing:	IP65
Certifications:	CE, cULus, DIN EN 14597
Software Tools:	Blue Control

Brochure	Datasheet(programmer)	Datasheet	Manual (Full)

Manual (Full)	Interface description Profibus	Interface description Profibus Parachannel	Interface description Modbus