PMA KS 50-1 PID Temperature Controller
KS 50-1
The universal KS 50-1 temperature controller is intended for precise and cost-effective control tasks. The instrument provides simple 2-point (on/off) control, continuous PID control or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external set-point input.
The KS 50-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter. Optionally there are two additional optocoupler outputs that can be used freely.
The controller is suitable for a number of industry applications including:
- Furnaces and ovens
- Burners and boilers
- Plastics processing
- Hot runners
- Driers
- Climatic chambers
- Heat treatment plants
- Universal continuous/switching version, i.e. reduced stocks
- 100 ms cycle time, i.e. also suitable for fast control loops
- 20ms as shortest pulse for very fast / strong actuators
- Freely configurable analog output, e.g. as process value output
- Customer-specific linearisation for all sensors
- Settings can be blocked via password and internal switch for high security
- Extended temperature range up to 60 °C allows mounting close to the process
- Easy 2-point or offset measurement correction
- Emergency operation after sensor break by means of the “output hold“ function
- Logical combination of digital outputs, e.g. for general alarm
- Programmer with 10 segments and “end“ signal
- RS 422/485 Modbus RTU interface
- Built-in transmitter power supply
- Splash-water proof front (IP 65)
Product Category: | Single Loop Controller |
Dimensions and size: | 96m x 48mm x 118mm (HxWxD), 1/8 DIN |
Connectors: | Pin or screw terminals |
Primary Input Type: | Universal (TC, RTD, DC linear mA/mV) |
Other Inputs: | External setpoint, Heating current monitoring |
Output Type: | Relay, Logic, Continuous, Optocoupler |
Max. Number of Outputs: | 3 |
Scan Time: | 100 ms |
Control Type: | 2-point (on/off), continuous PID control, or 3-point stepping |
Number of Programmer Segments: | 10 |
Power Supply: | 90-260 VAC, 20,4-26,4 VAC: Frequency 48-62 Hz, 18-31 V DC |
Communications: | Modbus RS422/485 |
Panel Sealing: | IP65 |
Certifications: | CE, cULus, DIN EN 14597, GOST-R |
Software Tools: | BlueControl |
Brochure | Datasheet | Manual (Full) | Interface description |
Bedienhinweis | |||
KS 50-1 Tcont - Temperature controller for tempering units and hot runners
Datasheet | Operation notes |
The KS 50-1 controller works in conjunction with Blue Control software. Functionality includes:
- Fast Parameter Configuration
- Clone Other Devices
- Simulator for Process Testing
- Remote Management for Increased Efficiency
- Familiar Software Environment for Ease-of-Use
Please visit our software page to download BlueControl®.