RM 200 system

RM 201 - Bus coupler CANopen RM 202 - Bus coupler PROFIBUS-DP RM 203 - Bus coupler MODBUS RTU RM 204 - Bus coupler Ethernet MODBUS/TCP RM 211 / 212 / 213 - Basic modules for RM 200 RM 221 / 222 - Analog inputs standard signals RM 224 - Analog inputs temperature RM 225 - Analog input strain gauge RM 231 - Analog output standard signal RM 241 / 243 - Digital inputs RM 242 - Digital inputs RM 251 - Digital outputs RM 252 - Digital outputs

RM 201 - Bus coupler CANopen

• Central coupler module with CANopen interface
• RM 201 : supported modules: all except RM 225 (strain gage)
• RM 201-1: supported modules: all except RM 224-x (temperature)
• Baudrate up to 1 MBd, configurable, auto scan
• integrated bus termination
• connectable up to 72 I/O points

RM 202 - Bus coupler PROFIBUS-DP

• Central coupler module with PROFIBUS-DP interface
• Baudrate up to 12 MBd, configurable
• connectable up to 72 I/O points

RM 203 - Bus coupler MODBUS RTU

• Central coupler module with MODBUS interface
• RM 203-0 : MODBUS RTU - RS 485
• RM 203-1 : MODBUS RTU - RS 232
• Baudrate up to 38.4 kBd, configurable
• connectable up to 72 I/O points

RM 204 - Bus coupler Ethernet MODBUS/TCP

• Central coupler module with Ethernet interface
• Connection RJ45 10BaseT
• connectable up to 72 I/O points

RM 211 / 212 / 213 - Basic modules for RM 200

• Basic module for inserting I/O modules
• RM 211: 3 sockets
• RM 212: 5 sockets
• RM 213: 10 sockets

RM 221 / 222 - Analog inputs standard signals

• RM 221-x: standard signals 0/4...20mA, -10/0...10V
• RM 222-x: standard signals 0/4...20mA, -10/0...10V + TPS with supply for transducers and potentiometric transmitters

RM 224 - Analog inputs temperature

• RM 224-0: 2x thermocouple, galvanic isolated
• RM 224-1: 4x thermocouple, Pt100
• RM 224-2: 1x mV high impedance, 1x thermocouple (e.g. for measuring combustion gaz), galvanic isolated

RM 225 - Analog input strain gauge

• Strain Gauge transducer
• 6-wire connection
• resolution 18 bit
• for applications in process weighing, dosing, force and load measurement...

RM 231 - Analog output standard signal

• RM 231-x : analog output standard signals
• variants for 0/4...mA and 0...10V or -10V...10V

RM 241 / 243 - Digital inputs

• 4x digital inputs
• RM 241: for 3-wire sensors or floating / non-floating contacts
• RM 243: for 110V/230V AC – signals

RM 242 - Digital inputs

• 8x digital inputs for 24V DC – signals

RM 251 - Digital outputs

• 8x digital outputs 24VDC

RM 252 - Digital outputs

• 4x relay